ProVari™ Mini Variable Voltage Electronic Cigarette
If you’re tired of good vapor at the start
of a new battery and weak vapor at the end, then the ProVari Mini variable
voltage electronic cigarette is for you! The ProVari Mini is a microprocessor
controlled variable voltage e-cig that lets you adjust the voltage in seconds
with just a few presses of a button. This model contains all the great features
of the larger model in a smaller more compact version. This model uses 18350
AW high drain batteries with the option to use 18490 batteries with the optional
extension cap.
Our variable voltage electronic cigarette has a regulated output which keeps
your selected voltage the same with each puff regardless of your remaining
battery power. As the battery drains, the ProVari Mini ecig will keep the
voltage consistent giving you the perfect vapor throughout the day.
ONLY use the recommended AW IMR high drain
batteries in your ProVari variable voltage ecig!
The ProVari Mini can be adjusted from 2.9– 6.0 volts in 0.1 volt increments.
The ProVari Mini will come with the same great features of
the ProVari V2 but in a smaller size.
The ProVari Mini’s variable
voltage settings include:
2.9,3.0,3.1,3.2, 3.3, 3.4,
3.5, 3.6, 3.7, 3.8, 3.9, 4.0, 4.1, 4.2, 4.3, 4.4, 4.5, 4.6, 4.7, 4.8, 4.9,
5.0, 5.1, 5.2, 5.3, 5.4, 5.5, 5.6, 5.7, 5.8, 5.9 and 6.0 volts.
We recommend only using AW IMR high drain
batteries in your ProVari Mini
With its built-in two digit display, you can visually adjust your voltage and access additional user functions on the device within seconds.
It's quick and easy!
To access the menu of options and adjust the
voltage on the ProVari Mini, you simply press the button 5 times in a row.
The digital display will turn on and you can flip through the voltage settings
with each button press. Once you are done making changes, leave the button
idle for 3 seconds and the ProVari will automatically save your settings and
the display will turn off. You are now ready to vape!
Your settings will always be saved even when you change the batteries.
No More Screwing Around
With the ProVari Mini you don't need screwdrivers, knobs,
volt meters, special adapters or a computer to adjust your settings.
There are no analog potentiometers to wear out and no dials to accidentally
bump.
Now you can quickly and easily select the
exact voltage you want!
Lighted Pushbutton
The
ProVari Mini variable voltage ecig has a translucent lighted pushbutton that
alerts you when the battery is low by slowly flashing a red light*. When the
battery is fully depleted and needs to be recharged, the light will flash
rapidly and the ProVari Mini will turn itself off to protect the battery from
over-discharge.
The lighted pushbutton can also light up every
time you press the button while using. This function can be toggled on/off
in the menu.
* Note: The low battery indicator will not activate if you have the lighted
pushbutton function off.
ProVari
Mini with AccuSet™ technology - Our built-in dynamic self-calibration
algorithm keeps the output voltage accurate to 1% or better over the life
of the product. The ProVari Mini will constantly monitor and adjust itself
to ensure you always get accurate voltage settings. Now a ProVari owner can
tell another ProVari owner to try a certain voltage setting with their favorite
brand and flavor of e-liquid and the flavor experience can be shared.
Every device will autotune itself so it's always precise!
One Battery Makes it Better!
The standard ProVari Mini takes
a single 18350 battery.With the optional 18490 extended end cap the Mini will
accept a single 18490 AW battery for longer run times.
The ProVari Mini uses a special boost circuit
to adjust the voltage to your desired level and it only needs a single battery
to operate. Never stack batteries in the ProVari Mini.
Single battery devices are
the safest electronic vapor cigarettes you can own!
We recommend only using AW IMR high drain
batteries in your ProVari Mini
You must use batteries that have a positive button on the
top. Flat top batteries will not work. Using
magnets on top of your batteries will void the warranty.
Battery Options
The optional extension cap replaces
the stock end cap and allows you to use a single 18490 battery. This will
extend the length of the device and offer you longer run times between charging.
When purchasing this option you will still receive the original end cap so
you can use both battery types. If you already own one of the extension caps,
then it will work with the Mini as well!
We recommend only using AW
IMR high drain batteries in your ProVari Mini
You must use batteries that have a positive button on the
top. Flat top batteries will not work. Avoid using magnets on
your batteries!.
The ProVari has numerous features
and monitors built-in:
On/Off Mode
You can put the ProVari in standby mode so it will not turn on the atomizer when the button is pressed.
This safety feature prevents the atomizer from turning on while it's in your pocket or bag and it prevents any settings from getting changed without you knowing.
16 Second Cutoff
If the button is held down for 16 seconds or longer, the ProVari will shut itself off until the button is released.
If you forget to turn it off before storing it in your pocket or bag, this
protects you and prevents the device from activating.
Short Circuit/Atomizer Protection
This protects the ProVari against shorted atomizers/cartomizers.
If this error occurs the ProVari will alert you by displaying E1 on the digital
display.
Fix: Remove the atomizer or cartomizer and replace with a different one.
Reverse Battery Protection
Protects against reverse battery installation.
Battery Monitoring/Over-Discharge Protection
The ProVari monitors the battery voltage and will automatically turn off when the battery is discharged.
Amperage Limiting to 3.5 amps
The ProVari Mini will monitor and shut itself off if it detects any excessive
over-current conditions. With the new higher amperage limit you can drive
plenty of power into a low resistance atomizer or cartomizer.
If this error occurs the ProVari will alert you by displaying E1/E2 on the
digital display.
Fix: Lower your voltage setting.
Thermal Monitoring
Shuts the device off if it detects a high temperature condition.
Once the device cools off, it will resume normal operation.
If this error occurs the ProVari will alert you by displaying E3 on the digital
display.
Fix: Let the device cool off for several minutes before using again.
(This is a very rare event and something you will most likely never see.)
ProVari Specifications:
3.48" L x 0.90" D (stock 18350 battery version) (without atomizer)
3.98"L x 0.90" D (with 18490 extension cap) (without atomizer)
Warranty: 1 Year
Warning:
ProVape will not be responsible for damaged atomizers/cartomizers.
Driving them with too much power for too long or running them dry can burn
them out.
We recommend you start with a low voltage setting and work your way up until
you find the right setting for your atomizer.
Using the incorrect batteries or using magnets on top of your battery is
dangerous and will void the warranty.
Extended Warranty - During checkout you will have the option to purchase
an optional 1 year extended warranty for $24.95. This will extend your warranty
for a period of two years total. All of the electronics are covered under
this warranty. This extended warranty must be purchased at the
time you purchase your device. You cannot purchase it after the device ships.
For full details click on the ? icon next to the extended warranty option.
Instruction Manual
To help save trees and do our part to help the environment,
we are no longer including a printed instruction manual inside the box with
the ProVari. Please download and review this PDF version of the manual.
ProVari
Mini Instruction Manual - English
Tips:
Batteries
- We recommend only using the approved AW brand 18350
and 18490 with extension cap in the ProVari Mini. All of the batteries that
we sell on our website have been tested to work with the ProVari Mini and
these are the only cells you should use. Using the wrong battery will void
your warranty and could damage the unit. Never use magnets on top of your
batteries as this is very dangerous and will void all warranties.
There is
a big difference between all the different batteries on the market and a lot
of testing has been done on these various batteries. The reason we recommend
using AW high drain cells is because these cells can output more current providing
the ProVari with the power it needs to operate properly. There are a number
of batteries that will cause issues including the Trustfire, Ultrafire
and other brands. These batteries cannot handle higher current output and
the battery will turn off while in use or cause a low battery alert much sooner
than it should because the batteries have a high internal resistance. Please
make sure you get the proper AW batteries to use in the ProVari Mini to avoid
problems.
Atomizers and Cartomizers
- The ProVari works with all types of atomizer and
cartomizers and all ranges of resistance including low resistance.
Click to Verify
