If you’re tired of good vapor at the start of a new battery and weak vapor at the end, then the ProVari variable voltage e-cig is for you! The ProVari is a microprocessor controlled variable voltage e-cig that lets you adjust the voltage in seconds with just a few presses of a button.
Now you can select the perfect settings for your atomizer, cartomizer and e-liquid!
Our variable voltage ecig has a regulated output which keeps your selected voltage the same with each puff regardless of your remaining battery power. As the battery drains, the ProVari ecig will keep the voltage consistent giving you the perfect vapor throughout the day.
We recommend only using AW IMR high drain batteries in your ProVari variable
voltage ecig.
The ProVari can be adjusted from 2.9 - 6.0
volts in 0.1 volt increments.
We recommend only using
AW IMR high drain batteries in your ProVari
With its built-in two digit display, you can
visually adjust your voltage and access additional user functions on the device
within seconds.
It's quick and easy!
To access the menu of options and adjust the voltage on the ProVari, you simply press the button 6 times in a row. The digital display will turn on and you can flip through the voltage settings with each button press. Once you are done making changes, leave the button idle for 4 seconds and the ProVari will automatically save your settings and the display will turn off. You are now ready to vape!
Your settings will always be saved even when you change the batteries.
No More Screwing Around
With the ProVari you don't need screwdrivers, knobs,
volt meters, special adapters or a computer to adjust your settings.
There are no analog potentiometers to wear out and no dials to accidentally
bump.
Now you can quickly and easily select the
exact voltage you want!
Lighted Pushbutton
The ProVari variable voltage ecig has a translucent lighted pushbutton
that alerts you when the battery is low by slowly flashing a red light*. When
the battery is fully depleted and needs to be recharged, the light will flash
rapidly and the ProVari will turn itself off to protect the battery from over-discharge.
The lighted pushbutton can also light up every
time you press the button while using. This function can be toggled on/off
in the menu.
* Note: The low battery indicator will not activate
if you have the lighted pushbutton function off.
ProVari
with AccuSet™ technology - Our built-in dynamic self-calibration
algorithm keeps the output voltage accurate to 1% or better over the life
of the product. The ProVari will constantly monitor and adjust itself to ensure
you always get accurate voltage settings. Now a ProVari owner can tell another
ProVari owner to try a certain voltage setting with their favorite brand and
flavor of e-liquid and the flavor experience can be shared.
Every device will autotune itself so it's always precise!
One Battery Makes it Better
The standard ProVari takes a single
18490/18500 battery.
The ProVari uses a special boost circuit to adjust
the voltage to your desired level and it only needs a single battery to operate.
Single battery devices are
the safest electronic cigarettes you can own!
We recommend only using AW IMR high drain
batteries in your ProVari. You must use batteries that have a positive button on the
top. Flat top batteries will not work.
One Bigger Battery Makes it Last Even Longer
The optional 18650 extension cap
replaces the stock end cap and allows you to use a single 18650 battery. This
will extend the length of the device and offer you longer run times between
charging. When purchasing this option you will still receive the original
end cap so you can use both battery types.
We recommend only using AW
IMR high drain batteries in your ProVari You must use batteries that have
a positive button on the top. Flat top batteries will not work.
The ProVari has numerous features
and monitors built-in:
On/Off Mode
You can put the ProVari in standby mode so it will not turn on the atomizer when the button is pressed.
This safety feature prevents the atomizer from turning on while it's in your pocket or bag and it prevents any settings from getting changed without you knowing.
16 Second Cutoff
If the button is held down for 16 seconds or longer, the ProVari will shut itself off until the button is released.
If you forget to turn it off before storing it in your pocket or bag, this
protects you and prevents the device from activating.
Short Circuit/Atomizer Protection
This protects the ProVari against shorted atomizers/cartomizers.
If this error occurs the ProVari will alert you by displaying E1 on the digital
display.
Fix: Remove the atomizer or cartomizer and replace with a different one.
Reverse Battery Protection
Protects against reverse battery installation.
Battery Monitoring/Over-Discharge Protection
The ProVari monitors the battery voltage and will automatically turn off when the battery is discharged.
Amperage Limiting to 3.5 amps
The ProVari will monitor and shut itself off if it detects any excessive over-current
conditions.
If this error occurs the ProVari will alert you by displaying E2 on the digital
display.
Fix: Lower your voltage setting.
V2 - Version 2 now has a higher amperage limit of 3.5amp for low resistance
atomizers and cartomizers.
Thermal Monitoring
Shuts the device off if it detects a high temperature condition.
Once the device cools off, it will resume normal operation.
If this error occurs the ProVari will alert you by displaying E3 on the digital
display.
Fix: Let the device cool off for several minutes before using again. (This is a very rare event and something you will most likely never see.)
ProVari Specifications:
4.1" L x 0.90" D (stock 18500 battery version) (without atomizer)
4.6"L x 0.90" D (with 18650 extension) (without atomizer)
Stock Warranty: 1 Year
Warning:
ProVape will not be responsible for damaged atomizers/cartomizers.
Driving them with too much power for too long or running them dry can burn
them out.
We recommend you start with a low voltage setting and work your way up until
you find the right setting for your atomizer.
Extended Warranty - During checkout you will have the option to purchase
an optional 1 year extended warranty for $24.95. This will extend your warranty
for a period of two years total. All of the electronics are covered under
this warranty. This extended warranty must be purchased at the
time you purchase your device. You cannot purchase it after the device ships.
For full details click on the ? icon next to the extended warranty option.
Instruction Manuals
To help save trees and do our part to help the environment,
we are no longer including a printed instruction manual inside the box with
the ProVari. Please download and review this PDF version of the manual.
Batteries
- We only recommend using approved 18490 and 18650 batteries
in the ProVari. All of the batteries that we sell on our website have been
tested to work with the ProVari and these are the only cells you should use.
There is a big difference between all the different batteries on the market
and a lot of testing has been done on these various batteries. The reason
we recommend using high drain cells is because these cells can output more
current providing the ProVari with the power it needs to operate properly.
There are a number of batteries that will cause issues including the Trustfire,
Ultrafire and other brands. These batteries cannot handle higher current
output and the battery will turn off while in use or cause a low battery alert
much sooner than it should because the batteries have a high internal resistance.
Please make sure you get the proper batteries to use in the ProVari to avoid
problems.
ProVari
with AccuSet™ technology - Our built-in dynamic self-calibration
algorithm keeps the output voltage accurate to 1% or better over the life
of the product. The ProVari will constantly monitor and adjust itself to ensure
you always get accurate voltage settings. Now a ProVari owner can tell another
ProVari owner to try a certain voltage setting with their favorite brand and
flavor of e-liquid and the flavor experience can be shared. 
